Put companies on watchlist
AT&S Austria Technologie & Systemtechnik AG
ISIN: AT0000969985
WKN: 922230
About
Company Snapshot
New: Enable Investor Alerts
Be informed about new publications
New: AI Factsheet

Corporate News meets AI! 
Content analysis and summary

EN GIF 300X250

AT&S Austria Technologie & Systemtechnik AG · ISIN: AT0000969985 · EQS - Company News (51 News)
Country: Austria · Primary market: Austria · EQS NID: 1958629
01 August 2024 07:00AM

AT&S records slight upward trend in the first quarter


EQS-News: AT&S Austria Technologie & Systemtechnik AG / Key word(s): Quarter Results
AT&S records slight upward trend in the first quarter

01.08.2024 / 07:00 CET/CEST
The issuer is solely responsible for the content of this announcement.


 

AT&S records slight upward trend in the first quarter

 

  • Revenue in Q1 2024/25 increases 1% to € 349 million compared to Q4 2023/24 (€ 345 million) and is 3% lower than in the prior-year quarter (Q1 2023/24: € 362 million)
  • Adjusted EBITDA of € 97 million corresponds to a margin of 27.6%
  • Guidance for FY 2024/25 and 2026/27 confirmed

 

Leoben – “As expected, we are still operating in a difficult market environment where forecasts keep changing. The market is recovering as projected, but the recovery is slower than anticipated. We expect the situation to stabilize towards the end of the current financial year,” CEO Andreas Gerstenmayer outlines the situation and emphasizes that the company is preparing for continuing price pressure. “Thanks to the timely intensification of our efficiency and cost optimization programs and the progressing customer diversification, we were able to increase revenue slightly over the previous quarter, while EBITDA even rose by 63%. This upward trend confirms the ongoing transformation process on which we continue to work very hard.”

 

“We are convinced that AT&S is well positioned in market segments benefiting greatly from digitalization and electrification, and that artificial intelligence will bring further opportunities. To that effect, we are swiftly driving our projects in Kulim and Leoben forward and are highly satisfied the progress achieved,” Gerstenmayer outlines the company’s perspectives and announces: “We will start production at the two new plants in Malaysia and Austria in the current financial year and position our global IC substrate triangle Chongqing-Kulim-Leoben in line with market requirements,” Gerstenmayer explains.

 

In comparison with the same quarter of the previous year, consolidated revenue declined by 3% to € 349 million (PY: € 362 million) in the first quarter of 2024/25. Adjusted for currency effects, consolidated revenue decreased by 4%. This decline was primarily driven by strong price pressure both for printed circuit boards and IC substrates, which AT&S had already been confronted with in the second half of the previous year.

 

EBITDA declined by 14% from € 75 million to € 65 million. The reduction in earnings is primarily attributable to the increase in price pressure. In order to counter the effects from the currently difficult market environment, such as price pressure and inflation, AT&S continued to consistently implement its comprehensive cost optimization and efficiency program. In addition to price pressure, the start-up costs in Kulim, Malaysia, and Leoben, Austria, as well as costs related to the cost optimization and efficiency program had a negative impact on earnings. Adjusted for these costs, EBITDA amounted to € 97 million (PY: € 92 million), which corresponds to an increase by 4%.

 

The EBITDA margin amounted to 18.5% (adjusted EBITDA margin: 27.6%), falling short of the reported prior-year level of 20.7% (adjusted EBITDA margin: 25.5%).

 

Depreciation and amortization increased by € 6 million to € 73 million (21% of revenue) due to additions to assets and technology upgrades. EBIT declined from € 8 million to € -8 million. The EBIT margin amounted to -2.3% (PY: 2.3%). Finance costs – net fell from € -5 million in the previous year to € -20 million primarily due to higher interest expenses. This development was largely driven by a significant increase in financial liabilities and the related finance costs. The loss for the period fell from € -2 million to €-34 million, leading to a decline in earnings per share by € 0.81 from €-0.18 to € -0.99.

 

The seasonally weak cash flow from operating activities amounted to € 14 million in the first quarter of 2024/25, down 94% on the previous year. The exceptionally good prior-year value benefited, on the one hand, from working capital optimizations totaling roughly € 115 million and, on the other hand, from higher payments related to the communicated major projects, which declined by approximately € 85 million year-on-year as planned. Based on the current planning, the company expects a seasonally significantly higher cash flow from operating activities of approximately € 70 million1 in the second quarter of 2024/25.

 

Key figures

in million Q1 2024/25 Q1 2023/24 Change in %
Revenue 349 362 -3%
EBITDA 65 75 -14%
EBITDA adjusted1) 97 92 4%
EBITDA margin (in %) 18.5 20.7 -
EBITDA margin adjusted (in %)1) 27.6 25.5 -
EBIT -8 8 -196%
EBIT adjusted1) 26 27 -1%
EBIT margin (in %) -2.3 2.3 -
EBIT margin adjusted (in %)1) 7.6 7.3 -
Profit/loss for the period -34 -2 >200%
ROCE (in %)1) -2.4 0.5 -
Net CAPEX 93 272 -66%
Cash flow from operating activities 14 229 -94%
Earnings per share (in €) -0.99 -0.18 >200%
Number of employees2) 13,573 14,111 -4%

 

1) Adjusted for start-up and restructuring costs

2) Incl. leased personnel, average. As at June 30, 2024: 13,512

 

The asset and financial position as of June 30, 2024 was still characterized by investing activities and the related financing activities. Total assets declined, mainly due to market-driven adaptations to capacity expansions. As a result of the transfer of assets ordered by a customer, total assets decreased by 1% compared to March 31, 2024 and amounted to € 4,636 million, despite additions to assets. The transfer of assets also led to a reduction in financial liabilities and the outstanding repayment volume of € 95 million in the financial year 2024/25. The equity ratio decreased by 0.4 percentage points to 20.3% due to the negative result for the period attributable to shareholders and the high investment volume

 

Cash and cash equivalents increased to € 691 million (March 31, 2024: € 676 million). In addition, AT&S has unused credit lines of € 432 million to secure the financing of the future investment program and short-term repayments.

 

Expected market environment

After the extreme fluctuations of the past quarters, volume has already stabilized in some business segments. A continuous increase in demand can be expected in the medium to long term as the implementation of the key business drivers, i.e. digitalization and electrification, continues to progress. In the short term, seasonal effects will contribute to the recovery.

 

The expectations for AT&S’s individual segments are currently as follows: In the area of mobile devices, new AI applications give rise to optimistic forecasts. Despite the slight recovery anticipated for mobile devices, the market in the printed circuit board segment will remain challenging due to persisting price pressure. The module printed circuit board business will continue to develop positively.

 

Although the PCB market is currently still under pressure in this area, among other things due to higher inventory levels in the supply chain and due to weak demand for e-mobility, it promises a growth trend in the medium term as the electronic content per vehicle continues to increase. In the industrial segment, the market is expected to stagnate at the week level of the previous year in 2024.

 

The market for notebooks is generally subject to quarterly fluctuations. In the markets for IC substrates, demand for notebooks in 2024 is expected to be higher than in 2023. This should lead to higher demand for IC substrates since inventories have now normalized. However, price pressure will continue.

 

Since a high share of investments in the server market is currently directed towards high-priced products focused on artificial intelligence, the reduction of inventories is proceeding more slowly than initially expected. Inventory levels should have normalized by the second half of the financial year 2024/25, and demand for server products is expected to pick up again. The most recent order planning of AT&S’s main customers also indicates such a development. Due to the expected change in architecture, further positive changes in product mix are anticipated, with the trends towards technologically higher-end IC substrates also expected to continue; AT&S will benefit from this trend.

 

Outlook 2024/25

Based on the stabilization on the volume side, demand is expected to recover, in particular in the second half of the financial year 2024/25. Nevertheless, the company assumes that strong price pressure will continue. The consistent implementation of and further focus on the already ongoing efficiency programs are intended to counter this pressure. In addition to comprehensive cost-cutting measures, a reduction of up to 1,000 employees will be implemented at the existing locations.

 

After the high investments of € 996 million in 2022/23 and € 855 million in 2023/24, net capex will decline significantly in the coming years. The management is still planning investments of roughly € 500 million for the financial year 2024/25 depending on the market environment and progress of projects. The majority of these investments will be used for the IC substrate production at the new plants in Kulim and Leoben.

 

With the start of high-volume production at the two plants at the end of the financial year 2024/25, revenue effects from the successful diversification of the customer base for IC substrates will increasingly show an impact. The significant capacity increase as a result of the two new plants is already attracting interest and visitors have regularly been impressed by the two new plants. Based on the positive reputation gained as a high-tech supplier, interest in the additionally created capacity is also increasing among existing and potential new customers.

 

AT&S expects to generate annual revenue in the range of € 1.7 to € 1.8 billion in the financial year 2024/25[1]and thus confirms the outlook for the current financial year. Excluding effects from the start-up of the new production capacities in Kulim and Leoben as well as one-off costs from the implementation of the cost optimization and efficiency program (including redundancy costs) of up to € 88 million, the adjusted EBITDA margin is expected to range between 25 and 27%.

 

Guidance 2026/27

The production capacity expansion in Kulim and the expansion of the site in Leoben are still developing positively despite the currently challenging global economic situation. AT&S assumes that revenue of approximately € 3.1 billion will be generated in the financial year 2026/271 and expects an EBITDA margin of 27 to 32%. This forecast does not include potential revenue from the second plant built by AT&S in Kulim. The management monitors the currently tense geopolitical situation very carefully in order to be able to respond to developments at any time and to make strategic adaptations.

 

 [1] Refers to the current company structure, including the plant in Ansan, Korea



01.08.2024 CET/CEST This Corporate News was distributed by EQS Group AG. www.eqs.com


Language: English
Company: AT&S Austria Technologie & Systemtechnik AG
Fabriksgasse 13
8700 Leoben
Austria
Phone: +43 (1) 3842200-0
E-mail: ir@ats.net
Internet: www.ats.net
ISIN: AT0000969985, AT0000A09S02
WKN: 922230
Indices: ATX
Listed: Regulated Unofficial Market in Berlin, Dusseldorf, Frankfurt, Hamburg, Hanover, Munich, Stuttgart, Tradegate Exchange; Vienna Stock Exchange (Official Market)
EQS News ID: 1958629

 
End of News EQS News Service

1958629  01.08.2024 CET/CEST

fncls.ssp?fn=show_t_gif&application_id=1958629&application_name=news&site_id=boersengefluester~~~ace3d64b-2049-452a-8d18-fbc8044c4b5f
Visual performance / price development - AT&S Austria Technologie & Systemtechnik AG
Smart analysis and research tools can be found here.

This publication was provided by our content partner EQS3.

EQS Newswire
via EQS - Newsfeed
EQS Group AG ©2024
(DGAP)
Contact:
Karlstraße 47 D-80333 München
+49 (0) 89 444 430-000

 

SMART * AD
EN GIF 970X250

P R O D U C T   S U G G E S T I O N S

The information presented here has been provided by our content partner EQS-Group. The originator of the news is the respective issuer, the company relating to the news, a publication service provider (press or information agency) which uses the distribution service of EQS to transmit company news to shareholders, investors, investors or interested parties. The original publications and other company-relevant information can be found at eqs-news.com.


The information you can access does not constitute investment advice. The presentation of our cooperation partners, where the implementation of investment decisions would be possible depending on the individual risk profile, is solely at the discretion of the person using the service. We only present companies of which we are convinced that the range of services and customer service will satisfy discerning investors.

If you are considering leverage products, familiarise yourself with the typical characteristics of the financial instruments beforehand. Take the time to determine the risk content of the planned investment before making an investment decision. Bear in mind that a total loss cannot be ruled out with leverage products.

For newcomers to the subject, we offer various options in both the training and the tools section, through which you can train theoretical knowledge and practical experience and thus improve your skills. The offer ranges from participation in webinars to personal mentoring. The range is continuously being expanded.


1 Lab features are usually functionalities that emerge from the think tank of the investor community. In the early stages, these are experimental functionalities whose development process is largely determined by use and the resulting feedback from the community. When integrating external services or functionalities, the functionality can only be guaranteed to the extent that the individual process elements, such as interfaces, interact with each other.