Put companies on watchlist
Wacker Neuson SE
ISIN: DE000WACK012
WKN: WACK01
About
Company Snapshot
New: Enable Investor Alerts
Be informed about new publications
New: AI Factsheet

Corporate News meets AI! 
Content analysis and summary

EN GIF 300X250

Wacker Neuson SE · ISIN: DE000WACK012 · EQS - Company News (52 News)
Country: Germany · Primary market: Germany · EQS NID: 1224739
09 August 2021 07:00AM

Wacker Neuson SE: Successful first six months with growth accompanied by increase in profitability and strong cash generation


DGAP-News: Wacker Neuson SE / Key word(s): Half Year Report
Wacker Neuson SE: Successful first six months with growth accompanied by increase in profitability and strong cash generation

09.08.2021 / 07:00
The issuer is solely responsible for the content of this announcement.


Wacker Neuson SE: Successful first six months with growth accompanied by increase in profitability and strong cash generation

  • Revenue for the first half of the year 16.5 percent above prior-year level; Europe and Asia-Pacific grow beyond pre-crisis levels; supply chains under significant strain
  • EBIT almost doubles, EBIT margin reaches 10.8 percent (+4.5 PP yoy)
  • Strong cash generation: Cash flow from operating activities at EUR 155.3 million
  • Net working capital ratio within strategic target corridor at 26.7 percent
  • Revenue and EBIT guidance for the year as a whole confirmed, narrowed within upper half of ranges forecast
  • Supply chains remain biggest challenge
  • New Executive Board team is complete

Munich, August 9, 2021 - Leading manufacturer of light and compact equipment the Wacker Neuson Group has reported a successful first half of 2021. However, the highly unstable situation across global supply chains presented the Group with significant challenges, especially in the second quarter. Revenue for the first six months of the year amounted to EUR 928.3 million, which is a rise of 16.5 percent relative to the previous year (H1/20: EUR 796.7 million). Adjusted for currency effects, this corresponds to an increase of 18.1 percent. The Group reported an even bigger rise in earnings with profit before interest and tax (EBIT) rising 98.6 percent to EUR 100.1 million (H1/20: EUR 50.4 million). The EBIT margin amounted to 10.8 percent, which is an increase of 450 basis points (H1/20: 6.3 percent).

"The first half of the year was a success, but not easy. We are back in growth mode and have seen a rise in profitability plus strong cash generation. Demand for our products is developing dynamically but recent weeks have seen our supply chains severely overstretched, and in some cases, interrupted. This situation presents us with major productivity and delivery challenges. We would like to thank our entire team, who are working extremely hard every day to get as many machines as possible onto our production lines and delivered to our customers," explains Karl Tragl, CEO of the Wacker Neuson Group.

Europe and Asia-Pacific segments exceed pre-crisis levels

Business developed particularly positively in Europe and Asia-Pacific, where the Group has already managed to exceed 2019 revenue levels. In the Europe segment, which accounts for 79 percent of Group figure, revenue for the first half-year increased 16.7 percent relative to the previous year to reach EUR 737.1 million (H1/20: EUR 631.4 million). In the construction sector, key growth drivers included the domestic markets of Germany and Austria, as well as the UK, where the Group continues to benefit from high growth rates with its innovative dumper models. The Group's business with compact equipment for the agricultural sector also developed positively. Revenue here reached EUR 174.7 million, which is an increase of 13.9 percent relative to a strong comparative baseline (H1/2020: EUR 153.4 million).

Revenue for Asia-Pacific in the first six months of the year rose 49.8 percent to EUR 32.8 million (H1/20: EUR 21.9 million). Business in Australia developed exceptionally positively. Buoyed by an extended dealer network, increased focus on independent rental companies and a product portfolio tailored to local needs, the Group more than doubled its revenue here for the first half of the year relative to 2020. The figure for H1 is also significantly higher than the pre-crisis figure for 2019.

Revenue for the Americas in the first half of the year amounted to EUR 158.4 million (H1/20: EUR 143.4 million), which is a rise of 10.5 percent. Adjusted for currency effects, revenue for this region grew by 18.1 percent. Customers remained cautious about investments at the start of the year in particular. However, business picked up markedly towards the end of the first quarter, buoyed in part by a gradual increase in demand from rental companies.

Clear increase in profitability, net working capital ratio in the strategic target range at 26.7 percent

Profit before interest and tax (EBIT) for the first half-year amounted to EUR 100.1 million (H1/20: EUR 50.4 million). The EBIT margin came to 10.8 percent (H1/20: 6.3 percent). Profit was positively impacted by increased sales volumes and greater productivity at production plants compared with the previous year despite manufacturing processes being impaired by the effects of current strains and, in some cases, disruptions to supply chains. Profit was also bolstered by the Group's ongoing stringent cost control measures.

The Group's strategic goal is to sustainably reduce the net working capital ratio expressed as a percentage of revenue to 30 percent or lower. Following significant progress in recent quarters, the net working capital ratio came in at 26.7 percent at the close of the reporting period and thus reached the target range after having just fallen short of it at the close of the first quarter (March 31, 2021: 31.3 percent; December 31, 2020: 29.1 percent; June 30, 2020: 48.1 percent). The reduction relative to the previous year was attributable to a number of factors including the sharp drop in inventory. Inventory levels of finished machines decreased sharply here due to strong demand. Conversely, levels of unfinished machines more than doubled since the start of the year as a result of overstretched and, in some cases, interrupted supply chains.

Strong cash generation, net financial debt remains at a very low level

At EUR 155.3 million, cash flow from operating activities for the first half of the year was clearly above the high prior-year figure (H1/20: EUR 124.8 million). This development was primarily fueled by the sharp increase in profit as well as the robust development of net working capital and the sale of non-current receivables. Discounting a fixed short-term investment in the amount of EUR 100 million, which was made to optimize the cash position, free cash flow amounted to EUR 133.5 million (H1/20: EUR 92.9 million).[1]

Net financial debt decreased to EUR 79.4 million as a result of the positive cash flow development (December 31, 2020: EUR 122.9 million; June 30, 2020: EUR 363.1 million).[2] Gearing is reported at 6.4 percent (December 31, 2020: 10.1 percent; June 30, 2020: 29.2 percent).

Strong demand accompanied by overstretched and, in some cases, disrupted supply chains

Order intake developed dynamically for the Group in the first half-year. However, major delays and repeated disruptions to global supply chains meant that orders could not be fulfilled in the planned timeframes. "The situation with global supply chains will remain our biggest challenge for the foreseeable future. We need to maximize production flexibility so we miss as few manufacturing windows as possible but are increasingly reaching the limits of what is feasible here. In addition to this, we are facing ever-rising prices for raw materials, components and shipping. We expect these developments to have a greater impact on revenue and earnings in the second half of the year. We are, however, delighted to see such strong demand for our products and services as this shows us, once again, that we are meeting our customers' needs," adds Dr. Tragl.

Taking into consideration the development of business to date, the prevailing conditions and the opportunities and risks facing the Wacker Neuson Group, the Executive Board has confirmed its revenue and earnings guidance for 2021 as a whole, placing it within the upper half of the ranges previously given. Revenue is projected in the range between EUR 1,750 and 1,800 million, and the EBIT margin is expected to lie between 8.75 and 9.50 percent (previous guidance for revenue: EUR 1,700 to 1,800 million; previous guidance for the EBIT margin: 8.0 to 9.5 percent).

New Executive Board team is complete

On June 1, 2021, Dr. Karl Tragl took on the role of Chief Executive Officer (CEO) and Chairman of the Executive Board. Christoph Burkhard took on the position of Chief Financial Officer (CFO) on the same date. With these appointments, the Executive Board of Wacker Neuson SE again comprises four members. Felix Bietenbeck is Chief Operations Officer (COO) and Chief Technology Officer (CTO), while Alexander Greschner is Chief Sales Officer (CSO).


[1] Including the fixed-term investment (reported under cash flow from investment activities), free cash flow amounted to EUR 33.5 million.
[2] Long-term borrowings + short-term borrowings from banks + current portion of long-term borrowings - liquid funds - fixed short-term investments.
 

Key indicators for the Wacker Neuson Group

Key figures in € million H1/21 H1/20 Delta Q2/21 Q2/20 Delta
Revenue 928.3 796.7 +16.5% 494.3 385.9 +28.1%
EBIT 100.1 50.4 +98.6% 56.5 21.5 +162.8%
EBIT margin (as a %) 10.8 6.3 +4.5 PP 11.4 5.6 +5.8 PP
Profit for the period 70.0 22.7 +208.4% 40.9 12.3 +232.5%
Earnings per share in € 1.00 0.32 +212.5% 0.59 0.18 +227.8%
Free cash flow1 133.5 92.9 +43.7% 123.7 88.6 +39.6%
1 Free cash flow before a fixed short-term investment in the amount of EUR 100 m.
 


Contact:
Wacker Neuson SE
Christopher Helmreich
Investor Relations
Preussenstrasse 41
80809 Munich, Germany
Tel.: +49 - (0)89 - 354 02 - 427
christopher.helmreich@wackerneuson.com
www.wackerneusongroup.com

The Wacker Neuson Group's complete half-year report is available at the following link: https://wackerneusongroup.com/en/investor-relations/financial-reports-presentations/2021

For press images relating to the Wacker Neuson Group, please see:
https://wackerneusongroup.com/en/news-media/press-images


About the Wacker Neuson Group:
The Wacker Neuson Group is an international network of companies, employing around 5,500 people worldwide. In fiscal 2020, the Group achieved revenue of EUR 1.6 billion. As a leading manufacturer of light and compact equipment, the Group offers its customers a broad portfolio of products, a wide range of services and an efficient spare parts service. Wacker Neuson Group is the partner of choice among professional users in construction, gardening, landscaping and agriculture, as well as among municipal bodies and companies in industries such as recycling and rail transport. The product brands Wacker Neuson, Kramer and Weidemann belong to the Group. Wacker Neuson SE shares are listed on the regulated Prime Standard segment of the Frankfurt Stock Exchange (ISIN: DE000WACK012, WKN: WACK01) and are member of the SDAX.



09.08.2021 Dissemination of a Corporate News, transmitted by DGAP - a service of EQS Group AG.
The issuer is solely responsible for the content of this announcement.

The DGAP Distribution Services include Regulatory Announcements, Financial/Corporate News and Press Releases.
Archive at www.dgap.de


Language: English
Company: Wacker Neuson SE
Preußenstr. 41
80809 München
Germany
Phone: +49 - (0)89 - 354 02 - 0
Fax: +49 (0)89 354 02 - 298
E-mail: ir@wackerneuson.com
Internet: www.wackerneusongroup.com
ISIN: DE000WACK012
WKN: WACK01
Indices: SDAX
Listed: Regulated Market in Frankfurt (Prime Standard); Regulated Unofficial Market in Berlin, Dusseldorf, Hamburg, Hanover, Munich, Stuttgart, Tradegate Exchange
EQS News ID: 1224739

 
End of News DGAP News Service

1224739  09.08.2021 

fncls.ssp?fn=show_t_gif&application_id=1224739&application_name=news&site_id=boersengefluester_html
Visual performance / price development - Wacker Neuson SE
Smart analysis and research tools can be found here.

This publication was provided by our content partner EQS3.

EQS Newswire
via EQS - Newsfeed
EQS Group AG ©2024
(DGAP)
Contact:
Karlstraße 47 D-80333 München
+49 (0) 89 444 430-000

 

SMART * AD
EN GIF 970X250

P R O D U C T   S U G G E S T I O N S

The information presented here has been provided by our content partner EQS-Group. The originator of the news is the respective issuer, the company relating to the news, a publication service provider (press or information agency) which uses the distribution service of EQS to transmit company news to shareholders, investors, investors or interested parties. The original publications and other company-relevant information can be found at eqs-news.com.


The information you can access does not constitute investment advice. The presentation of our cooperation partners, where the implementation of investment decisions would be possible depending on the individual risk profile, is solely at the discretion of the person using the service. We only present companies of which we are convinced that the range of services and customer service will satisfy discerning investors.

If you are considering leverage products, familiarise yourself with the typical characteristics of the financial instruments beforehand. Take the time to determine the risk content of the planned investment before making an investment decision. Bear in mind that a total loss cannot be ruled out with leverage products.

For newcomers to the subject, we offer various options in both the training and the tools section, through which you can train theoretical knowledge and practical experience and thus improve your skills. The offer ranges from participation in webinars to personal mentoring. The range is continuously being expanded.


1 Lab features are usually functionalities that emerge from the think tank of the investor community. In the early stages, these are experimental functionalities whose development process is largely determined by use and the resulting feedback from the community. When integrating external services or functionalities, the functionality can only be guaranteed to the extent that the individual process elements, such as interfaces, interact with each other.